Flooding of houses is common in rural areas. A slag blasting process is essential to deal with this common phenomenon. The main cause of this problem is in the cold season and high humidity is generated. Please refer to the following article on how to fight coal slag.
The general phenomenon of the problem is that we can see the floor often has water, or the wall has high humidity. In many cases, you can see that the floor or wall has water that sometimes flows in a stream, making it very uncomfortable to walk.
The main cause of the problem is that the water vapor (humidity) in the air is high, the background temperature is low, so the moisture in the air in contact with the floor is condensed into water. Like when you use a refrigerator, in some cases you see water condensing on the wings or condensing on the sides of the refrigerator.
The phenomenon of flooding is common in rural areas, the main reason is that in rural areas, the doors are not designed tightly, there are many holes, so there is a lot of air entering the house, so there is a lot of noise. For homes that use air conditioners and dryers in the home, there will be no heat.
In order to prevent the foundation of our house from flooding, we have two measures to prevent water from spreading as follows:
With the 2 proposed principles, we can use the measure to suit our family’s economic conditions. In this article, I will talk about how to create the most reasonable house background layer.
The principle of this floor insulation model is so that the temperature below does not transfer to the surface of the floor.
Insulate the floor with coal slag.
You can see the structure of this background layer consists of 5 layers as follows:
In principle, we also rely on the principle of not allowing cold temperatures to transfer to the surface of the floor. In this method we use insulation by insulating air layer.
Air insulation.
The background layers are structured as follows:
In principle, we only need to have a layer of insulation under the floor to reduce the coldness of the floor, which will reduce the phenomenon of moisture.
Sealed wooden floor.
In this method we often see used for wooden floor tiles, but this insulation foam layer we require has a higher thickness.
Insulate the floor with Polystyrene foam.
In principle, this layer of ceramic tiles has holes and acts as air cushions to insulate heat only. Because air is less able to transfer heat than all heavy materials in construction.
The floor has ceramic tiles.
Here are 5 ways you can handle the problem of waterproofing your home. If you have already built a house, we can use other methods. And if not, we can apply 1 of these 5 ways to fight the heat.